Steel

material: Steel pipe, round, ø 21.3 mm (1/2"), wall thickness 1.75 mm, steel 1.5 mm, dimensions: Length = Frame width, Surface: powder-coated (except chrome-plated)

Material: Steel, wall thickness 2mm, Table legs cross section: cross section 30 x 30 mm or Ø 35 mm, Table legs length: 430 mm, 730 mm, 930 mm, table legs with plastic floor leveling screws (thread length 20 mm)

Table legs, QS 10°, rectangular: 2 x 30 x 30 mm, height without table top from 710 mm, adjustable base diameter 40 mm, Table legs, QL 10°, rectangular: 2 x 30 x 30 mm, height without table top 970 mm, adjustable base diameter 40 mm

material: Tubular steel, round, ø 21.3 mm (1/2"), wall thickness 1.75 mm, Set contents: 2 side sections for offset cross h = 520 mm, d = 600 mm, 2 cross struts l = 1000 mm, 4 height adjusters l=228 mm, accessories

material: Steel tube, round, ø 21.3 mm (1/2"), wall thickness 1.75 mm, dimensions: height x depth, Surface: powder-coated (except chrome-plated), Design E2: Adam Wieland 1965 - derived from the original design by Egon Eiermann from 1953

Material: steel, perforated plate, Surface: powder coated (except for chrome-plated), Dimensions: 95 x 50 x 950 mm or 95 x 50 x 1320 mm (width x height x length)

Material: Steel wire, galvanized, Processing: round bent and welded, given dimensions: Outer ø x material ø

material: sheet steel, Dimensions: given dimensions = approx. outer measurements including lid (l x w x h)

Material: steel wire, Color: white lacquered, Thickness: 3-4 mm (varying according to the size of the ring), Features: flush welded

Frame: removable, nickel-plated

Material: steel, brass-plated, Alloy: copper-zinc

material: square steel tube, 30 x 30 mm, wall thickness is 2 mm, has round hole on both ends, ends are cut at an angle, each end with a d ..., Given dimension: upper side length (length of bottom side = 1388 mm)

Material: Steel, welded, Surface: Painted, Specified dimensions: Outer diameter x material diameter

Material: through hardened rolling bearing steel, alloy 100 CR6, material number 1.3505, Color: silver, high gloss, Hardness: 62 HRC

Basic data: rectangular base plate with two attachment holes, spring-loaded metal clip, Hole distance: from hole centre to hole centre 73 mm (87 mm to 120 mm width)

material: silver coloured steel housing, round, underside: finely polished

material: sheet steel, Dimensions: given dimensions = approx. outer measurements including lid (l x w x h)

Material: steel, nickel plated, Surface: silver, shiny, smooth, Handle piece: round with hole

Material: Steel tube, round, ø 25 mm, ø i. 20 mm, Surface: powder-coated or chrome-plated, Small items: Plastic support points and adjustable glides ø 30 mm, Dimensions: height ( max. 735 mm ) x width x length

Material: folded sheet steel, th = 1.5 mm, Dimensions: 315 mm x 600, 700 or 780 mm (w x d), Surfaces: black (RAL 9005), white (RAL 9016), metallic gray, silver gray (RAL 9006)

Material: glossy painted iron wire (the silver version consists of a copper core), Characteristics: round, soft, with nickle-free, wrapped around a spool

Material: nickel-plated steel, Dimensions: 62 mm

design: steel wire, welded and painted white, Wire diameter: approx. 3 mm (varies depending on size of frame), suitable frames: E27, given dimensions: approximate dimensions

Material: Steel, nickel plated, Properties: round rings, ring spacing 80 mm

Material: galvanized, Dimensions: Ø 20, 25 or 30 mm, Color: silver