Transparency: opaque, Material: Inner layers of rigid PVC, top layers of soft PVC, Material layers: 5-ply, Material thickness: 3 mm
4 Variants
Ecobra cutting mat top quality, translucent
from 13,90 €
material: inner layer made from hard PVC, top layer from soft PVC, Material layers: 3-layered, Material strength: 3 mm, Features: one side printed with grid design and cm graduation
Aluminium cutting ruler with incumbent steel edge
from 14,50 €
thin, anodized aluminium, incumbent steel edge for cutting and laying out templates, aluminium beveled face with imprinted mm graduation, anti-slip (rubberized) reverse side, comes in soft plastic case, th = 6 mm, w...
3 Variants
Exchange part for Proxxon circular table saw FET
from 9,90 €
Altera table rest and cutting mat, light gray
from 31,90 €
Color: Light gray, Material layers: 3, Thickness: 3 mm, Surface: Rough, anti-slip
Ecobra metal cutter, for 9 mm blades, lock screw
from 7,50 €
silver aluminium handle with chromed steel clip, unrestricted feeder, positioning lock screw, blade in metal guide
Awl
from 15,50 €
Product description: light coloured wooden handle, ergonomically shaped with brash bush, diameter: 1.9 mm tip
K1 artist knife
from 8,50 €
Contains: Handle and 5 K1 blades, Material: Aluminium, Handle: Round aluminium handle; knurled grip zone, Length handle: 115 mm
Snap-off blades standard for 9 mm cutter, pointed
from 2,50 €
come in translucent plastic case
4 Variants
Steel ruler, rust-proof, rigid
from 6,90 €
conforms to EC class II, reads from left to right, stiff construction (th = 1.0 – 1.4 mm), rust-free spring band steel, etched or engraved graduation: upper edge 1/1 mm und lower edge 1/2 mm, conversion table...
2 Variants
Aluminium cutting ruler with steel edge, thin
from 22,90 €
Material: anodized aluminum, steel edge: for cutting or ink drawing/Alufacette with imprinted mm graduation, Equipment: with hanging hole and non-slip underside (rubber)
Ecobra cutter, metal, silver
from 9,50 €
Material: full metal housing, steel blade, Colour: silver, Attributes: metal cutter guide, notched slider, auto lock, Configuration: with hole for hanging, clip and breakoff device
3 Variants
Cutting mat XXL Pro 5-ply, green
from 89,00 €
Transparency: opaque, Material layers: 5-ply, Material thickness: 3 mm, Surface: smooth
Protractor and cutting set square, acrylic
from 19,90 €
transparent, long side has a steel edge, other sides are bevelled, degrees scale run in opposing direction and is shaded yellow, imprinted graduation
4 Variants
Drafting and cutting ruler, acrylic
from 18,90 €
transparent, steel edge and bevelled edge, raised nubs, partial silicone strips, coloured grid and graduation, th = app. 3.0 mm
Tolerance class: conforms to DIN ISO 2768 m/EC class II, design: reads from left to right, flexible construction, Strength: 0.5 mm, Dimensions: etched or engraved graduation, upper edge 1/1 mm, lower edge 1/2 mm
yellow soft-grip plastic handle (anti-slip), notched feeder, positioning lock screw, blade in metal guide
2 Variants
Ulmer steel cutting square with facing
from 49,90 €
steel, open-worked with a bar in the middle, painted grey, bevelled edge on a side piece, without graduation, knob for gripping, th = 2 mm
Cutter for 18 mm blades with screw-lock
from 6,90 €
plastic handle with cushioned grip, notched feeder, positioning lock screw, blade in metal guide, snap-off aid
Tweezers for handicraft
from 3,90 €
Metal, curved, l = 115 mm
Styrocut 3 thermo cutter
from 829,00 €
Worktop: multiplex, covered with anodised, chequered aluminium, Worktop dimensions: 265 x 610 mm, Bracket: guide bar moves along the side on ball bearings, front and back adjustable buffers
Cutting mat Hobby Line, blue/grey
from 18,90 €
Color: Gray/blue, Material layers: 3, Thickness: 3 mm, Surface: Rough
Ecobra metal cutter, for 9 mm blades, auto-stop
from 7,50 €
Material: full metal housing, steel blade, Colour: silver, Attributes: metal cutter guide, notched slider, auto lock, Configuration: with hole for hanging, clip and breakoff device
Wooden modelling sticks, set No. 1
from 15,90 €
Product: birch modelling sticks, Material: birch, sanded and polished, Length: 150 mm
12 Variants
Round punch
from 4,90 €
Material: Steel C 45, Cutting hardness: HV 480 bis 558 kp/mm2 (HRC 47-52), Surface: milled finish; shank machined, lacquered, Standard: DIN 7200 Form B
Snap-off blades standard for 18 mm cutter
from 2,50 €
Material: Steel, Packing: translucent plastic case
Art knife cutter set
from 12,50 €
round aluminium handle with knurled grip zone, 6 different blades
NT BD 100 pointed 9 mm replacement blades
from 2,90 €
Width: 9 mm, Thickness: 0.4 mm, Angle: 30°
Olfa SVR-2 utility knife, 9 mm blades
from 10,90 €
Body: stainless steel handle and clip, Stepped feed: with Auto-Stop, Package contents: cutter with blade, 2 replacement blades, Packaging: blister pack
NT A 300 RP utility knife for 9 mm blades with auto lock
from 6,90 €
Material: Plastic housing; metal guide bar, Dimensions: 147 mm x 18 mm x 11 mm, Weight: 23 g, Color: Beige
NT Circular cutter C 1500 P
from 34,90 €
white plastic with metal workings, includes protective cap for the blade and a guide line template
Styrocut cutting wire for thermal saw
from 20,90 €
Material: alloy steel wire, Thickness: 0,19 mm, Specific resistance: 40 Ω/m
Olfa cutter No. 300 for 9 mm blades
from 8,50 €
yellow plastic handle, notched feeder, positioning lock screw, blade in metal guide
Olfa snap-off blades Excel Black for 18 mm cutter
from 8,50 €
come in black plastic case, made with tool steel (highest quality)
