Scope: for working in conjunction with interlinking silicone additives (non-inhibiting)
2 Variants
Varaform light
from 23,90 €
cotton mesh material with permeable coating, rectangular mesh (app. 4.0 x 7.0), spacing between holes app. 2.0, 18% cotton, 82% thermoplastic synthetic resin, heating time: 1 to 2 minutes, working life: 2 to 3...
Keramiplast modelling clay
from 6,90 €
air-dried, comes in air-tight PE foil
4 Variants
PUR fast casting resin F27 (G27)
from 32,90 €
Material: Two-component rapid casting resin, Properties: very impact resistant, very low viscosity (excellent pourability), good filling properties, low odor
5 Variants
Worbla´s Finest Art modeling material sheet
from 5,00 €
cellulose-polyester composite, light brown and opaque, th = 1 mm, ca. 1100 g/m², can be thermoplasically shaped any number of times, one side is coated with a thermoplastic adhesive (smooth, semi-matte surface)...
2 Variants
Thibra Pearl thermoplastic modelling granulate, smooth
from 8,90 €
Material: Thermoplastic workable material, Surface: very smooth, matt, Color: Beige, Thickness: approx. 1.0 mm
4 Variants
PUR F26 fast cast resin (G26)
from 32,90 €
Material: 2 component quick casting resin, End state: cures to an opaque beige-brown colour, Density: (at room temperature) approx. 1.1 g/cm³
4 Variants
Gedeo modeling clay
from 9,90 €
air-drying, has synthetic binders, does not crack as it dries, curing time is 4 to 5 days (can be shortened by use of a microwave over), after opening must be stored in moist cloth and enclosed in a tightly closed...
15 Variants
Stockmar Kneading Beeswax
from 2,20 €
th = 6 mm, rich in pigments, with pure beeswax, corresponds to European Safety Norm (Toy Safety) EN71 (see info), for colour sorting of each set see info
Mars Clay, standard, brown
from 35,80 €
material: non-drying modelling clay made from wax, fillers and pigments, Handling: can be worked with from 15 C° to 25 °C, Pre-heating temperature: 55 °C to 60 °C
Papier-mâché modelling pulp
from 2,90 €
cellulose pulp, air-dried, comes in plastic bag
4 Variants
TFC silicone rubber type 1 low-viscosity, set
from 35,90 €
Material: Silicone rubber, Shore hardness: A 20, Color: mint green, Mixing ratio: 1:1 by weight
10 Variants
Sugru self-setting silicone rubber
from 8,90 €
Material: air-hardening plasticine based on the silicone elastomer Formerol, Properties: self-adhesive, permanently elastic after curing (Shore hardness 70-Sh), colours can be mixed with each other, low odour, temper ...
3 Variants
Alginat universal moulding material
from 24,90 €
Material: powdery algae-based casting material with silane chips, Consistency after curing: elastic, dimensionally and geometrically stable, Color: blue, Odor: neutral
2 Variants
Varaform heavy
from 24,90 €
cotton mesh material with permeable coating, square mesh (app. 4.0 x 4.0), spacing between holes app. 2.5, 18% cotton, 82% thermoplastic synthetic resin, heating time: 1 to 2 minutes, working life: 2 to 3 minutes,...
Fine-work tools set No. 2
from 32,90 €
steel, chromed or nickel-plated, wooden handle, l = 140 - 165 mm
Wooden modelling sticks, set No. 1
from 15,90 €
Product: birch modelling sticks, Material: birch, sanded and polished, Length: 150 mm
3 Variants
Plaster bandages
from 2,70 €
Color: white
5 Variants
Formcard thermoplastic bio-plastic, set of 3
from 6,90 €
Material: thermoplastic bioplastic, Dimensions: card size: 2.5 x 55 x 85 mm
TecClay, lightweight, light brown
from 18,90 €
product: non-drying modelling clay, material: with binding agents (microwax among others), fillers (zinc stearate, magnesium and micro hollow globules among others) and dyes
4 Variants
TFC PU casting resin set
from 24,90 €
Material: 2-component casting resin, Shore hardness: D 75, Color: white/beige (component A) and beige (component B), Mixing ratio: 1:1 by weight
24 Variants
Fimo Professional modeling clay 8004
from 3,90 €
Baking time and temperature: 30 minutes at 110°C, Packaging: reclosable foil packaging, Weight: 85 grams
4 Variants
Acrystal Prima acrylic resin
from 33,90 €
material: two component water-based acrylic resin system, Range of application: for casting, laminating and coating, for interior as well as protected exterior spaces
3 Variants
Super Sculpey Living Doll
from 19,90 €
product: oven-curing modelling compound (15 min. at 130 °C)
5 Variants
Worbla's Transpa Art modelling sheets
from 5,00 €
Product description: thermoplastic polyester, Colour: colourless, transparent, Thickness: ca. 0,8 mm, Density: ca. 1000 g/m²
3 Variants
Modelling plaster
from 3,90 €
white, comes in paper sack with foil insert
13 Variants
Fimo modelling clay Soft 8020
from 2,90 €
Baking time and temperature: 30 minutes at 110°C, Packaging: film packaging, Weight: 57 grams
Material: two-component polyurethane casting resin, Colour: colourless transparent when cured, Shore hardness: soft (ca. Sh-A 40 - 70), Mixing ratio: resin to hardener ca. 1.5-2.5 to 1
2 Variants
Silk Clay modelling material, permanently elastic
from 3,00 €
Material: very soft, light modeling compound, Properties: air-drying, remains elastic after drying, Drying time: 2-24 hours, depending on object size, Packaging: resealable plastic can
2 Variants
Creastone concrete casting compound
from 8,90 €
Mixing ratio: 10:1, 100 gram powder: makes 50 ml casting compound, Curing time: 2-3 days, Can be painted: 1-2 days after demoulding
2 Variants
Stoff-Steif fabric stiffener
from 17,50 €
Material: Hardener based on a pollutant-free vinyl ester/acrylic co-polymer, Color: colorless transparent, pH-value: 3.8, Consumption: 1200 to 2500 g/m² (depending on textile)
Silk Clay, Funny Friends
from 15,90 €
Contents: 3x40 g ass. Silk Clay®, approx. 20 rhinestones, 5 key rings, 10 ass. funny eyes with attachments, 5 feathers, 5 suction holders ..., Package size: 30 x 18 x 5 cm
Original Sculpey, white
from 17,90 €
oven-curing modelling compound (15 min. at 130 °C), very pliable, very crack resistant, miscible
