Plate core: fire pore model building board from extruded polystyrene foam, Surface: rough (not sheared), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1: Euroclass E, conforms to DIN 4102-1: building material c ...
2 Variants
Styrofoam, light blue, untrimmed
from 6,90 €
Plate core: medium pore insulating block made out of extruded polystyrene foam, Surface: smooth, semi-gloss surface, Characteristics: compression resistant, certified per EN 13501-1, conforms to DIN 4102: construction material class B1 (flame resistant)
11 Variants
Standard plasticine, coloured
from 3,90 €
product: handicraft plasticine
6 Variants
SikaBlock PUR M600N modeling board
from 9,90 €
Material: microcellular, polyurethane-based model making material, Colour: light brown, Shore hardness: Shore 58 D (= 100 Shore A), very hard (ISO 868), Density: 600 kg/m³ (ISO 845)
2 Variants
Mould making plasticine
from 6,90 €
Scope: for working in conjunction with interlinking silicone additives (non-inhibiting)
cotton mesh material with permeable coating, rectangular mesh (app. 4.0 x 7.0), spacing between holes app. 2.0, 18% cotton, 82% thermoplastic synthetic resin, heating time: 1 to 2 minutes, working life: 2 to 3...
3 Variants
Polystyrene hard foam, white, trimmed
from 4,90 €
Board core: fine-pored insulation board made of extruded polystyrene hard foam, Surface: smooth (trimmed), Properties: very pressure-resistant (high density), Edges: straight
Keramiplast modelling clay
from 6,90 €
air-dried, comes in air-tight PE foil
4 Variants
PUR fast casting resin F27 (G27)
from 32,90 €
Material: Two-component rapid casting resin, Properties: very impact resistant, very low viscosity (excellent pourability), good filling properties, low odor
5 Variants
Worbla´s Finest Art modeling material sheet
from 5,00 €
cellulose-polyester composite, light brown and opaque, th = 1 mm, ca. 1100 g/m², can be thermoplasically shaped any number of times, one side is coated with a thermoplastic adhesive (smooth, semi-matte surface)...
2 Variants
Thibra Pearl thermoplastic modelling granulate, smooth
from 8,90 €
Material: Thermoplastic workable material, Surface: very smooth, matt, Color: Beige, Thickness: approx. 1.0 mm
4 Variants
SikaBlock PUR rigid modelling foam M80
from 22,90 €
material: fine-pored polyurethane-based rigid foam, Density: 80 kg/m³, Linear thermal expansion coefficient: 70 x 10 -6 K -1 (DIN 53752)
Material: 2 component quick casting resin, End state: cures to an opaque beige-brown colour, Density: (at room temperature) approx. 1.1 g/cm³
4 Variants
Gedeo modeling clay
from 9,90 €
air-drying, has synthetic binders, does not crack as it dries, curing time is 4 to 5 days (can be shortened by use of a microwave over), after opening must be stored in moist cloth and enclosed in a tightly closed...
15 Variants
Stockmar Kneading Beeswax
from 2,20 €
th = 6 mm, rich in pigments, with pure beeswax, corresponds to European Safety Norm (Toy Safety) EN71 (see info), for colour sorting of each set see info
Papier-mâché modelling pulp
from 2,90 €
cellulose pulp, air-dried, comes in plastic bag
5 Variants
SikaBlock PUR modelling board M330 (240 kg)
from 14,90 €
material: extremely fine pored polyurethane-based light moulding material, Density: 240 kg/m³
2 Variants
Varaform heavy
from 24,90 €
cotton mesh material with permeable coating, square mesh (app. 4.0 x 4.0), spacing between holes app. 2.5, 18% cotton, 82% thermoplastic synthetic resin, heating time: 1 to 2 minutes, working life: 2 to 3 minutes,...
Fine-work tools set No. 2
from 32,90 €
steel, chromed or nickel-plated, wooden handle, l = 140 - 165 mm
Wooden modelling sticks, set No. 1
from 15,90 €
Product: birch modelling sticks, Material: birch, sanded and polished, Length: 150 mm
6 Variants
SikaBlock modelling/tooling board M1000
from 22,90 €
material: homogeneous polyurethane-based modelling material, Density: 1,000 kg/m³, Modus of elasticity: 1,800 MPa (ISO 178)
3 Variants
Plaster bandages
from 2,70 €
Color: white
5 Variants
Formcard thermoplastic bio-plastic, set of 3
from 6,90 €
Material: thermoplastic bioplastic, Dimensions: card size: 2.5 x 55 x 85 mm
TecClay, lightweight, light brown
from 18,90 €
product: non-drying modelling clay, material: with binding agents (microwax among others), fillers (zinc stearate, magnesium and micro hollow globules among others) and dyes
very fine pored polyurethane-based rigid foam for model making, light yellow or light green, density: 150 kg/m³; compressive strength: 1,6 MPa (ISO 604), modulus of elasticity: 65 MPa (ISO 178), linear coefficient...
4 Variants
TFC PU casting resin set
from 24,90 €
Material: 2-component casting resin, Shore hardness: D 75, Color: white/beige (component A) and beige (component B), Mixing ratio: 1:1 by weight
4 Variants
SikaBlock PUR modelling board M450
from 8,90 €
material: extremely fine pored polyurethane-based light moulding material, Density: 450 kg/m³
24 Variants
Fimo Professional modeling clay 8004
from 3,90 €
Baking time and temperature: 30 minutes at 110°C, Packaging: reclosable foil packaging, Weight: 85 grams
4 Variants
Acrystal Prima acrylic resin
from 33,90 €
material: two component water-based acrylic resin system, Range of application: for casting, laminating and coating, for interior as well as protected exterior spaces
3 Variants
Super Sculpey Living Doll
from 19,90 €
product: oven-curing modelling compound (15 min. at 130 °C)
